FLOMAX® 15 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX® 15 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 184TC and 215C frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.
Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and/or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Download Data Sheet PDF
|
Suction and Discharge
|
3" x 3" NPT
|
|
Materials of Construction
|
316 stainless steel
|
|
|
Bronze
|
|
|
Cast iron
|
|
Flow
|
Up to 320 GPM
|
|
Head Feet
|
Up to 145'
|
|
Impeller
|
6.0" max diameter, semi-open
|
|
Max Solid Size
|
.625"
|
|
Motor
|
Up to 7.5 HP
|
|
Drive Options
|
Close coupled 184TC
|
|
|
Close coupled 215C
|
|
|
Engine mount: 5.5 HP, 6.5 HP, 11 HP, and 13 HP
|
|
|
Pedestal
|
|
|
PumPAK® (without motor)
|
|
Seal
|
Special seal material combinations available (consult factory)
|
|
|
Standard cabon / ceramic / Viton
|
|
Features
|
Renewable wear plate
|
|
|
Stainless steel drive sleeve
|
|
|
Stainless steel fasteners
|
|
|
Up to a 25' suction lift
|
|
Options
|
5 blade impeller available for higher flows
|
|
|
Baseplate shown above is optional
|
|
|
Double seal available for dry run applications
|
|
|
Hydraulic motor .73 cu. in.
|