Petroleum 15 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. To handle many different fuels, the Petroleum 15 is available in three distinct models:PO, PG and PE 15.
A Petroleum 15 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 184TC and 215C frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.
Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The Petroleum 15 Pump is available in three distinct models: PG, PO and PE
Model PG Pumps - Compatible For Gasoline, Kerosene, Avgas & Jet Fuel
Model PO Pumps - Compatible For BioDiesel, Fuel Oil & Diesel
Model PE Pumps - Compatible For Ethanol & E 85
Download Data Sheet PDF
|
Suction and Discharge
|
3" x 3" NPT
|
|
Materials of Construction
|
Cast Iron
|
|
|
Ductile iron
|
|
Flow
|
Up to 320 GPM
|
|
Head Feet
|
Up to 145'
|
|
Impeller
|
PE 15 - semi-opem cast iron, 316 SS (optional)
|
|
|
PG 15 - semi-open cast iron, aluminum (optional)
|
|
|
PO 15 - semi-open cast iron
|
|
Motor
|
Up to 7.5 HP
|
|
Drive Options
|
Close coupled 184TC
|
|
|
Engine mount 11 HP
|
|
|
Engine mount 13 HP
|
|
|
Engine mount 5.5 HP
|
|
|
Engine mount 6.5 HP
|
|
|
Hydraulic motor .73 cu. in.
|
|
|
Pedestal
|
|
|
PumPAK® (without motor)
|
|
Seal
|
PE 15 - carbon / silicon carbide / Viton
|
|
|
PG 15 - carbon / silicon carbide / Viton
|
|
|
PO 15 - carbon / Ni-Resist / Viton
|
|
Compatible For
|
PE 15 - ethanol, E 85
|
|
|
PG 15 - gasoline, avgas, kerosene, jet A/8
|
|
|
PO 15 - biodiesel, fuel oil, diesel
|
|
Features
|
Gas engine for diesel fuel transfer
|
|
|
Non-spark clamp (on some models)
|
|
|
Renewable wear plate
|
|
|
Stainless steel drive sleeve
|
|
|
Stainless steel fasteners
|
|
|
Up to a 25' suction lift
|