Petroleum 30 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. To handle many different fuels, the Petroleum 30 is available in three distinct models: PO, PG and PE 30.
A Petroleum 30 PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 215TC, 256TC and 284TSC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive.
Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The Petroleum 30 Pump is available in three distinct models: PG, PO and PE
Model PG Pumps - Compatible For Gasoline, Kerosene, Avgas & Jet Fuel
Model PO Pumps - Compatible For BioDiesel, Fuel Oil & Diesel
Model PE Pumps - Compatible For Ethanol & E 85
Download Data Sheet PDF
|
Suction and Discharge
|
3" x 3" NPT
|
|
Flow
|
Up to 500 GPM
|
|
Head Feet
|
Up to 190'
|
|
Impeller
|
PE 30 - semi-open cast iron, 316 SS (optional)
|
|
|
PG 30 - semi-open cast iron, aluminum (optional)
|
|
|
PO 30 - semi-open cast iron
|
|
Motor
|
Up to 25 HP
|
|
Drive Options
|
Close coupled 215TC
|
|
|
Close coupled 256TC
|
|
|
Close coupled 286TSC
|
|
|
Pedestal
|
|
|
PumPAK® (without motor)
|
|
Seal
|
PE 30 - carbon / silicon carbide / Viton
|
|
|
PG 30 - carbon / silicon carbide / Viton
|
|
|
PO 30 - carbon / Ni-Resist / Viton
|
|
Compatible For
|
PE 30 - ethanol, E 85
|
|
|
PG 30 - biodiesel, fuel oil, diesel
|
|
|
PG 30 - gasoline, avgas, kerosene, jet A/8
|
|
Features
|
Non-spark clamp (on some models)
|
|
|
Renewable wear plate
|
|
|
Stainless steel drive sleeve
|
|
|
Stainless steel fasteners
|
|
|
Up to a 25' suction lift
|
|
Mounting Options
|
PE 30 - explosion proof, class 1, group D
|
|
|
PG 30 - explosion proof, class 1, group D
|
|
|
PO 30 - TEFC
|