MP Pumps, Inc.


34800 Bennett
Fraser, MI, 48026-1686

Phone:      586-293-8240
Toll Free:  800-563-8006
Fax:          586-293-8469

Contact Us

 

 

 

 

News

MP Pumps Introduces New FM8 SS
MP Pumps Introduces New FM8 SS
8/28/2013

MP Pumps, Inc. introduces the new, redesigned Flomax ® 8, 316 stainless steel self-priming pump.  The new design features the following improvements:

The suction port will now be standard as an ANSI 150#, 2” NPT 316 stainless steel flange and Viton flapper assembly.  

The standard discharge side will be the SAE 4-bolt port to allow our customers to make use of their own discharge connections.  An optional discharge flange kit is available and will include the ANSI 150 #, 2” NPT 316 stainless steel flange, Viton gasket, hex head capscrews and lockwashers. 

A fill port has also been added to the suction side of the housing to make the initial filling of the priming chamber easier.

New to the Flomax® 8 stainless steel pump line is the addition of a 316 stainless steel 5 blade, high flow impeller.  This impeller design is utilized to take advantage of available horsepower in certain engine and motor combinations as well as increase the overall performance range of the Flomax® 8 pumps.

These design changes combined with the Flomax® 8 pumps outstanding performance make this a winning combination for our MP Pumps customers in a wide variety of today’s marketplaces.  Please check out our new video highlighting all of the exciting improvements and new 316 SS products on our website, www.mppumps.com.

MP Pumps Introduces New FM15 SS
MP Pumps Introduces New FM15 SS
7/30/2013

MP Pumps, Inc. introduces the new, improved Flomax® 15, 316 stainless steel self-priming centrifugal pump.  The new design features the following improvements:

The pump housing has been redesigned to make use of SAE 4-bolt flange patterns for both the suction and discharge ports.  The suction port will now be standard with an ANSI 150#, 3” NPT 316 stainless steel flange and Viton flapper assembly. 

The standard discharge side will be the SAE 4-bolt port to allow the customer to make use of their own discharge connections.  An optional discharge flange kit is available and will include the ANSI 150#, 3” NPT 316 stainless steel flange, Viton gasket, hex head capscrews and lockwashers.  

Further design improvements on the Flomax® 15 include the repositioning of the priming port as well as cast bosses that are drilled and tapped for mounting of the wearplate, which has eliminated two potential leak paths from the pump housing. 

These design changes, combined with the Flomax® 15 pumps already outstanding performance make this a winning combination for our MP Pumps customers in a wide variety of today’s marketplaces.  Please check out the following sales brochure and our new video highlighting all of the exciting improvements and new 316 SS products on our website, www.mppumps.com.

MP Pumps Introduces New FM30 SS
MP Pumps Introduces New FM30 SS
7/30/2013

MP Pumps, Inc. introduces our new Flomax ® 30 and 35, 316 stainless steel centrifugal self-priming pumps.  We have expanded upon our industry leading 316 stainless steel product line by offering these pumps with the following design features:

These pumps are equipped with a standard viton flapper, priming chamber fill-plug, and either a 3” NPT Suction Flange (FM30) or a 4” NPT Suction Flange (FM35). The discharge port is 3” ANSI 150 #, stainless steel flange. The standard mechanical seal is carbon/ceramic/viton/stainless steel.

Two basic Pumpak styles allow the Flomax® 30 and 35 self-priming centrifugal pumps to fit standard Nema “C” electric motor frames, engines or the standard MP pedestal. The Pumpak is completely assembled and can be mounted to a standard motor in minutes.

The addition of 316 stainless steel metallurgy to the Flomax® 30 and 35 pumps outstanding performance make this a winning combination for our MP Pumps customers in a wide variety of today’s marketplaces.  Please check out the following sales brochures and our new video highlighting all of the exciting improvements and new 316 SS products on our website, www.mppumps.com.

MP Pumps Introduces the FRX 75 P
MP Pumps Introduces the FRX 75 P
3/12/2013

 

As part of MP Pumps continuing effort to provide new products, we are happy to announce that the FRX 75 P is now ready for production.  The FRX 75 P provides an ideal choice for those tough transfer applications in the marine, agricultural, commercial, and industrial industries.

The FRX 75 P utilizes a Polypheneylene Sulfide (Ryton) or PPS cover and housing. This PPS material cover and housing are used in conjunction with a 316 SS impeller to provide outstanding resistance in a wide variety of chemical applications.  The FRX 75 P is offered with 1” hose connections as well as a carbon/ceramic/Viton mechanical seal. The pump is capable of handling fluid temperatures of up to 220° F and has a maximum pressure rating of 30 psi.

The FRX 75 P is offered with 115/230 VAC, 12 VDC, and 24VDC electric motors.  Marine ignition protected motors are also available.  The pump can also be rotated in 90° increments. 

The FRX 75 P is part of MP Pumps continuing effort to invest in new products for today’s fast moving market. MP Pumps is committed to increasing our pump offerings and application opportunities for our valued customers.

 

MP Pumps Introduces the FRX 75 H
MP Pumps Introduces the FRX 75 H
3/11/2013

MP Pumps has now expanded its high performance FRX 75 pump models to include the new FRX 75 H pump.  This 316 SS pump has 1” hose connections that provide an alternative to hose barbs threaded into the standard ¾” NPT connections. This pump is ideal for use in the marine, agricultural, commercial, and industrial markets for transfer applications of compatible fluids.

These 316 SS units offer superior corrosion resistance for the transfer of chemical compounds. The standard units are equipped with carbon/ceramic/Viton bellows mechanical seal. Both AC and DC motors are offered as well as an optional marine ignition proof motor. As an added measure of versatility the pump can be rotated in 90° increments. 

The FRX 75 H is another example of MP Pumps continuing to invest in new product releases for our product line as we strive to offer more quality products aimed at increasing applications and opportunities for our valued customers.

New MP Pumps Petroleum Brochure
New MP Pumps Petroleum Brochure
3/7/2013

 

We are pleased to announce the release of our new MP Pumps, Inc. Petroleum Pumps brochure. MP has combined both the self-priming and end suction Petromaxx Series information into one full color, 10-page brochure.

This sales brochure contains a brief description of the Petrolmaxx Series, product description tables, and cutaway view of the pump characteristics as well as performance curves.  An explanation of the three specific product groups our Petrolmaxx products are divided into is given for better understanding of how these pumps are meant to be positioned within the petroleum market.

This brochure can be found by going to the literature section of our website and choosing the “Petroleum Pumps” listing under the “Catalog” section.  This brochure is the perfect handout to compliment your sales effort in the petroleum pump market.  Brochures are available by ordering Form 8169.

Contest Winner Announced
Contest Winner Announced
1/24/2013

MP Pumps, Inc. is proud to announce the winner of our “Search for the Oldest Operating MP Pump Contest”.  Our winner was Pat S. from Idaho and his 1961 MP Pumps aluminum Flomax® that is close coupled to a Briggs & Stratton engine. Pat uses his Flomax® pump for general purpose duties on his farm.  He says he plans on using his prize money to purchase a new Flomax® with a Honda engine. We would like to thank Pat as well as everyone else for their interest and participation in our contest.

Once again the Flomax® proves that it is a champion with its unmatched performance and durability.  The MP Pumps Flomax® is a leader in the self-priming pump market and stories such as Pat’s echo what we like to say about the Flomax® pump, “often copied but never duplicated”.  Check out the Flomax® and our complete line of MP Pumps under the “Products” tab on our website and see which model will best suit your pumping application.

MP Pumps Introduces P-MAX
MP Pumps Introduces P-MAX
12/7/2012

The P-MAX is a self-priming centrifugal pump, capable of creating a vacuum sufficient to lift liquids up to 20 feet above of the fluid source.  Once primed, the pump’s built in flapper valve will maintain a full column of liquid in the suction line. The P-MAX comes equipped with 2” suction and discharge ports.  The pumps are constructed of a rugged polyester resin capable of handling most of your fluid handling needs.  The pumps are supplied with a carbon/ceramic/Buna N mechanical seals, (2) 2” NPT adapters, (2) 2” hose adapters, band clamps, and a suction strainer. 

Powered by an EPA and CARB certified 6.5 HP engine, the P-MAX is capable of providing flows up to 180 GPM and a maximum discharge head of 113’.  At 51 pounds and housed in a convenient, easy access role cage, the P-MAX is portable and easily transferred for application use.

The P-MAX is an excellent choice for use in the agricultural, commercial, industrial, and marine markets for applications such as: tank-filling, de-watering, flood control, and much more.

If you’re looking for an affordable solution to many of your fluid handling requirements, the P-MAX is the pump for you. 

MP Pumps expands ABS products
MP Pumps expands ABS products
11/16/2012

For 70 years MP Pumps, Inc. has been supplying high quality centrifugal pumps to the marine industry.  Several of our Flomax and HHLF models have been ABS Type Approved and we are now proud to announce that we have expanded the number of models that will carry this designation. 

As of September 2012, the Flomax 5, Flomax 10, and HHLF HO have been accepted by ABS and will be added to our ABS Type Approved certificate.  They will join the Flomax 8, Flomax 15, Flomax 30, Flomax 40, and the HHLF series in our ABS line-up. The addition of these models will allow MP Pumps, Inc. to better serve the marine industry with a wider range of flow and pressure capabilities. 

At MP Pumps, Inc. we are proud to supply the marine industry with our ABS Type Approved products and we will look forward to working with you and your customer to meet their marine industry pumping needs.